Agriculture tunnel plastic tomato commercial Multi Span Greenhouse
Description
Greenhouse can provide the conditions of suitable illumination,
moisture and temperature, raising the output and resisting the
natural disasters. It can bring forward or backward the provision,
remitting the contradictions of provision and demand.
Advantage
1. Steel structure
The main galvanized frame(The main column according to the wind
load and snow load).
2. Roof cover.
The greenhouse film (PE, PVC, EVA, PO) has different thickness
(from 80 micro to 200 micro).
The intelligent greenhouse has glass and polybonate sheet.
3. Shading system
There are outside shading system and inner shading system (inner
warming syatem).
4. Cooling and heating system
(1) The cooling system is composed by cooling fan and cooling pad,
which can maintain the temperature in the greenhouse at 26-30℃ in
summer.
(2) There are two type to heat the temperature, one is to use
boiler, other is to use electric.
Boiler fuel can be coal, oil, gas and bio fuels. Boiler need to lay
the pipelines and water warming blower to heat.
If use electricity, it need to use lectric warm air blower.
Venlo Greenhouse:
Venlo-style multi-span greenhouse is the most widely used structure
in the world. It is a greenhouse covered with hard materials. It
has also become the preferred structure for glass greenhouses and
PC panel greenhouses in China.
Features:
The main skeleton structure of the Venlo-style multi-span
greenhouse: adopts three roof ridges hot-dip galvanized steel
structure with good anti-corrosion performance The service life of
the main body is more than 20 years, It also has good light
transmittance, the transmittance of single-layer glass greenhouse
up to 97%, the double glazing is 88%.
Covering:
Covering materials are mainly divided into polycarbonate hollow
board (PC sunshine board), double float glass or tempered glass,
etc. Greenhouses are generally covered with UV- and
condensation-resistant polycarbonate hollow panels (PC sunlight
panels) or glass, and the special hot-dip galvanized steel
framework has the advantages of good lighting, thermal insulation,
and economical durability, and strong resistance to impact damage.
It can also be covered with different materials according to the
differences in climate conditions and specific design requirements
of the customer's area.
Main configuration:
The greenhouse can be fully automatic controlled and can be
equipped with internal and external shading systems, internal
thermal insulation systems, skylight side window systems, wet
curtain fan cooling systems, heating systems, spraying and
irrigation systems, etc. Appropriate configuration is required.
Application:
It can be used not only as a production greenhouse for vegetables
and flowers, but also as a nursery greenhouse for vegetables and
flowers.
Parameter:
| Specifications of Orient Greenhouse |
Basic parameters | Wind Load | 0.5KN/m² |
| Snow Load | 0.3KN/m² |
| Greenhouse constant load | 15kg/m² |
| Maximum drainage capacity | 140mm/h |
| Frame | Hot dip galvanized steel |
| Covering Materials | PO or PEP film, Glass, Polycarbonate sheet |
| Optional systems | Ventilation System | Shading System |
| Cooling System | Heating System |
| Irrigation System | Seedbed System |
| Hydroponics System | Control System |
| Lighting system | Other customized equipment |
| We will make design proposal as customers specific requirements. |
Our services
1. Reliable design: a strong and creative design, research and
development team to design the greenhouse according to the local
climate and geographical conditions.
2. Greenhouse installation: engineers can be sent to your country
for greenhouse installation.
3. Quality assurance: we have strict quality control and mature
technology, our products have achieved
National and industry standards.All our exports will be strictly inspected before shipment.
4. One-to-one 24-hour online service: for any questions, please
contact us.
5. After-sales service: if there is any quality problem during the
warranty period, we will assume the responsibility and provide
on-site service as needed.
1. When can I get the price?
Usually within 24 hours after we get your inquiry. If you are
urgent to get the price, please call me or tell me in the email.
2. Can you accept our own design, logo, and pattern?
We can produce it according to your design.
3. Are you a manufacturer or Trading company?
We are a greenhouse manufacturer in Chengdu China, are greenhouse
manufacturing, and We also welcome you to visit our factory.
4. When can I get the goods?
Produce time is within 15days, and shipping is usually 20-35days.
5. What is your best price?
The same style of greenhouse can be used in different thicknesses
of steel, and different thicknesses of the film. These will have a
direct impact on greenhouse prices. And the larger the area, the
lower the unit price will be
Spec.
