Agriculture Tunnel High Quality Wind - Resistant Hot Galvanized
Structure Multispan Plastic Film Greenhouse
Product Description
High Quality Glass Venlo greenhouse with PC sheet
Product Name: High Quality Glass Venlo greenhouse with PC sheet
Main parts: arch, main column, secondary column, film slot, bean
ridge,M structure,gutter Application: fruit and vegetable planting,
flower planting, sightseeing exhibition hall etc.
Optional system:outside shading system,insede shading system, top
window ventilation system, moving seedbed system, heating system,
side ventilation system, wet curtain cooling system, sprinkler drip
and irrigation system, electrical control system
Advantages
1) Hot dip galvanized steel structure;
2) Stable structure, high intensity;
3) Assembly style without welding points;
4) Excellent anti-corrosion effectiveness;
5) Customized design and high quality material;
6) Good aging resistance;
7) Long life time, assemble easily.
Covering material
Super strong: impact strength is 16 times that of glass;
Energy saving: more than 40% energy saving than glass cage
greenhouse;
Durable: After 10 years of application of solar panels, the light
transmittance is reduced by no more than 10%.
Cold and heat resistant: between -40 °C and 120 °C, the solar panel
does not deform
Optional sytem
Outside shading system
1:The outside shading system can improve the environment of the
greenhouse by adjusting
the light intensity. When the greenhouse is exposed to intense
sunlight, the use of shading
network with shading effect, so that most of the sun can not be
directly illuminated to the
greenhouse, to avoid burning crops after strong light.
2:Skeleton includes (column,beam, longitudinal beam) electric
reducer, external shade net,
black curtain cord, black pressure cord, drive shaft, drive shaft,
ull frame rack push rod,
support hanging wheel,drive side aluminum alloy profile,positioning
Retaining ring,weight plate and corresponding connection fittings.
All steel parts are hot dip galvanized and have good outdoor rust
and corrosion resistance.
3:The transmission part is composed of a geared motor and
supporting components,and
the power is output through a geared motor and a transmission shaft
connected thereto.
4:The shading net is made of high-density polyethylene, UV
stabilizer and anti-oxidation
treatment. It has the advantages of no off-line, strong wind
resistance, UV protection,
anti-aging, good flatness, etc., and its service life is more than
8 years.
Cooling system
Cooling pad is installed on the north side of the greenhouse to
ensure that all incoming air passes through the cooling pad and
then into the greenhouse environment. The cooling pad surface likes
wavy .This shape allows the air to be in limited contact with the
surface of the cooling pad.The pump will hit the water at the top
of the cooling pad,a small hole that flows through the entire wet
curtain. Thereby reducing the temperature of the air itself. The
cold
air flows through the greenhouse, absorbs the heat in the room, and
is discharged through
the fan to achieve the purpose of circulating cooling.
The wet curtain is usually installed at the northern end of the
greenhouse and the fan is installed at the southern end of the
greenhouse. When it is necessary to cool down, the fan is activated
to force the air in the greenhouse to be forced out, causing a
negative pressure; at the same time, the water pump hits the water
on the opposite wet curtain. When the outdoor air is sucked by the
negative pressure, it passes through the gap of
the wet curtain at a certain speed, causing the water to evaporate,
cooling the cold air flowing through the greenhouse, absorbing the
heat in the room, and discharging it through the fan, thereby
achieving the purpose of cooling.
| width (mm) | 300 | 600 | |
| height (mm) | 1500 | 1800 | 2000 |
| thickness (mm) | 100 | 150 | 200 |
| hole diameter(mm) | 5 | 7 | 9 |
Cooling Fan:1380X1380X400mm, 1200X1200X270mm, 1070X1070X270mm,
900X900x270mm
